Clear video under jamming, at range, and on thin links.
FLEX is a software AV1 video system for UAS, UGV and USV operators, platform integrators and GCS vendors. It runs on the Pi-class compute already on the platform and keeps full-motion video up over links that used to carry voice only.
1080p30 at 500 kbps, as low as 350 kbps. No GPU, no new hardware, no changes to your radios.
FLEX operating points beside the published minimum bitrates for live H.265 and H.264 streaming at the same resolution.
| Operating point | FLEX (AV1) | H.265 minimum | H.264 minimum |
|---|---|---|---|
| 1080p30 | 250–500 kbps | 4,000 kbps | 5,000 kbps |
| 720p30 | 100–250 kbps | 2,000 kbps | 3,000 kbps |
| 480p | 50–100 kbps | 300 kbps | 400 kbps |
| 480p5 floor | ~10 kbps | — | — |
FLEX figures are recommended operating points. H.265 and H.264 figures are YouTube’s published live-encoder minimums at 30 fps, not a matched-quality test.
FLEX is built for links that are jammed, contested or stretched to the edge of range. AV1 error-resilient coding with golden-frame anchoring on a one-second cadence means lost packets cost picture quality for a moment. The stream does not freeze waiting for a keyframe.
Ukraine MoD field tests, Nov 2026. Raspberry Pi 5 host, Starlink under active enemy jamming, with link dropping below 100 kbps during the mission. Documentation available upon request.
Actual performance depends on the waveform, the interference and the scene.
Everything in the FLEX Manager web UI is also in the REST API, so a radio, autopilot or GCS can run FLEX with no operator in the loop.
Your radio, autopilot or link monitor calls the API and FLEX retunes the encode in about 100 ms.
Up to four cameras composited at the source into one stream. Spotlight or hide any input live.
Video, Codec2 voice and KLV metadata in one stream, built for ultra-low-bandwidth links such as HF.
Feeds raw frames to your on-board model through a local pipe. No extra video stream off the platform. Detections can be drawn back into the video.
Endpoint reference is available to customers and integration partners.
FLEX streams play natively across the TAK ecosystem on 5.5 and later — ATAK and WinTAK, no plugins, no sideloaded decoders. FLEX also auto-detects UAS Tool streams (RTSP Push) and transcodes them on the fly, so existing drone feeds drop straight into the common operating picture.
| MANET | Silvus, Persistent Systems, TrellisWare, L3Harris, Thales |
|---|---|
| HF | AN/PRC-160 3G IP |
| SATCOM | MUOS, UHF TACSAT, Ku/Ka, Starlink/Starshield, Iridium Certus 100+ |
| GCS and players | TAK 5.5+ and TAK Server, Anduril Lattice, Vidterra Compass, ArduPilot ecosystem, GStreamer and FFmpeg pipelines |
| Output protocols | RTSP and RTSPS, SRT with AES encryption, UDP unicast and multicast, WebRTC web viewer, WHIP push, IPv4 and IPv6 |
| Raspberry Pi 5 | Validated |
|---|---|
| Raspberry Pi CM5 | Validated |
| Rockchip RK3588, NVIDIA Jetson Orin | Validated |
| Qualcomm Snapdragon and Dragonwing | Validated |
| Blackwire IVPM inline module | Dev kits available. See IVPM → |
| Minimum | 64-bit ARM or x86 Linux, multiple modern cores, 1 GB RAM, 20 GB storage, Docker. Encoding runs on the CPU; no GPU or encode hardware required. |
| Load | On a Pi 5, roughly one core and under 1 GB RAM per 1080p30 stream from a raw camera source, with no transcode. |
| Codecs | AV1 (primary) |
|---|---|
| Operating points | 1080p30 at 250–500 kbps · 720p30 at 100–250 kbps · 480p at 50–100 kbps |
| Bitrate and frame rate | 10 kbps to 1 Mbps, 1–60 fps, both adjustable on a live stream. Floor ~10 kbps at 480p5 |
| Latency | 25–50 ms glass-to-glass in low-latency mode, excluding network transit |
| Loss recovery | Sub-second, no stream restart. Golden-frame anchoring on a one-second cadence |
| Inputs | USB, MIPI CSI, HDMI/SDI, ONVIF, GoPro, RTSP, RTMP, SRT, UDP, RTP/SDP, TAK and Lattice feeds |
| Outputs | RTSP, RTSPS, SRT (AES), UDP unicast and multicast, WebRTC web viewer (WHEP), WHIP push |
| Audio and metadata | Codec2 (1.2–3.2 kbps) or Opus voice. KLV passthrough and HUD, CoT to TAK, Lattice entities |
| Mesh | Flex units find each other and relay AV1 video over SRT; a hub can transcode or build a multiview |
| Deployment | Docker, by offline installer or Compose template. Debian 12, Ubuntu 22.04+, Raspberry Pi OS 64-bit, OpenWrt |
| Management | FLEX Manager web UI (English and Ukrainian) and REST API over HTTPS. IPv4 and IPv6 |
Export. EAR99 under BIS commodity classification Z1901344.
Write Raspberry Pi OS 64-bit or the Blackwire OpenWrt image to the device.
Run the offline installer. FLEX services start in Docker.
Send the device serial, paste the key back. No network needed after that.
Pick a camera and an operating point, then start the pipeline.
| Lifetime | Perpetual. One license, one device, never expires. |
|---|---|
| Attritable | 90-day term for expendable platforms. Clock starts on first use. |
| Fleet | License at deploy time from system configuration or a Compose template. |
| Field | Keys issued and apportioned in the field for deployed customers. |
Pricing on request. Every license is tied to one device and runs offline.
For pricing or a demonstration on your links, write to info@blackwire-ts.com.
Full documentation, deployment guides, and downloads live on our gated FLEX portal. Submit your email address at the portal, and once approved — individually, or by requesting domain approval to cover your whole organization — you'll receive a one-time passcode to sign in.
Everything in FLEX is driven by a full REST API — pipelines, encoding, outputs, KLV, audio, webhooks, and playback — built on open standards. The complete API reference is available on the portal, with the same access process.